Allows multiple Frequency Shift Keying (FSK) and Time Division Multiple Access (TDMA) enabled receivers on a single DPH feed from a DPH LNBF or the new DPH42 Switch Reduce cable complexity and cost of upgrades Increased DC current rating to support...
Inputs: - (4) for satellite locations Outputs: - (4) for receivers (only a single cable needed for Dish Pro Plus dual tuner receivers) - (4) for band-stacking another switch or 2.
The DPH 42 Switch supports the following installation scenarios: Customers in a Non-CONUS location. Customers within a Low Beam area which requires a 24” or 30” dish. Customers whose Programming requires 77°° INSTALLATION REQUIREMENTS...
A connection point used between the DISH antenna and a two-Hopper installation configuration Nodes manage the transfer of programming between Hopper and Joey Inputs: - (3) for LNBF hookup Outputs: - (2) for Hopper receivers - (2) MoCA outputs for Joey...
Simplify your Hopper installation with the next generation of installation accessories from DISH This hub is required in two-Hopper3 Installations, DPH 42 Switch Required.
The latest DISH equipment for your Hopper3 installation Required for single-Hopper installations with Hybrid LNBF.
connection point used between the DISH antenna and a single Hopper installation configuration Nodes manage the transfer of programming between Hopper1, Hopper2 and Joey Inputs: - (2) for LNBF hookup Outputs: - (1) to Hopper receiver - (1) MoCA...
DISH SuperJoey Intergrator is required to add a SuperJoey to your Hopper system.
Inputs: (3) for satellite locations Outputs: (3) for receivers (only one cable needed for Dish Pro Plus dual tuner receivers), cascadable.
Nickel-plated with stainless steel ground screws for maximum outdoor survivability
Higher electrical performance for satellite frequencies
Single, dual and extended lengths
Patented splice design
High return loss >35dB
Lower insertion loss
The DISH Network Approved, STVC, provides low loss diplexing of DBS and TV signals, seperating them prior to satellite receiver input. Filters harmonics in the off-air spectrum from satellite conversion devices.