The DPH 42 Switch supports the following installation scenarios: Customers in a Non-CONUS location. Customers within a Low Beam area which requires a 24” or 30” dish. Customers whose Programming requires 77°° INSTALLATION REQUIREMENTS Even though they are both Hybrid components the DPH LNBFs WILL NOT work with a DPH 42. The supplied power inserter must be connected to Receiver Satellite In port 1 of the DPH 42. The power inserter is required and is NOT optional. In a Hopper installation, the power inserter may be connected between the Hopper and the DPH Hub and/or a DPH Tap. Approved RG-6 cable required. Weather caps, not terminators, must be used for sealing off all unused ports on the switch. Weather caps have a flat top and are pre-installed on the switch. A Solo Hub or Duo Hub must be used for all Hopper receivers.